Need Help to Identify Parts

[ford33]

I have a few engine pans I don't know what they fit as well as a pair of trunk hinges

 

[DavidG]

The engine splash pans in the first photo are post-'34s given the holes in the left side pans for the steering sector housing to pass through.

 

[cas3]

The hinges look like the deck lid for a 33-34 coupe or roadster

 

[V8ER]

The top brown one and the bottom row center gray one (which has been sawed through) are both '35-'36 left side engine pans.

 

[Karl Wescott]

The hinges look like the deck lid for a 33-34 coupe or roadster

Every 1933-34 trunk hinge (and 1935-36 for that matter) I have seen have been CAST, these are stamped two piece and welded together. The trunnions (body mounts) are also cast and use 4 mounting holes.

 

[cas3]

Good eye Karl, I did not notice they are stamped. The shape seems correct, reproduction's ?

 

[ford33]

Here are some better photos. 2 stacked pans identified as 35-36 left, thanks.. Could the trunk hinges be 37 coupe or 38 sedan? I had both as parts cars

 

[Karl Wescott]

Per a photo sent to me privately, It appears the hinge is 1937-38 Coupe, Club Coupe, or Club Convertible. (Not possible to rule out 1938 Standard sedan at this time). Another caveat is the op is from Canada as is the source of my reference photo, so there is an unlikely possibility of a Canada only variation.

 

[ford33]

Thanks for the help