Need help identifying throttle base-holley 94?

W

Wils1514

Junior Member
I have what I believe is a Holley 94 style carb with a 4 bolt base on my 59ab flathead. It has a 4 bolt aluminum intake. It has a crack in the throttle base so I’m looking to replace it. The problem is I’m not sure what I should be looking for. I have attached some pics but I haven’t measured the bores yet.
 

Attachments

  • IMG_1931.jpg
    IMG_1931.jpg
    38.5 KB · Views: 62
  • IMG_1932.jpg
    IMG_1932.jpg
    43.2 KB · Views: 58
  • IMG_1933.jpg
    IMG_1933.jpg
    43.4 KB · Views: 51
I don't know **** but I'll take a wild guess... 8BA model 94 carb on a mismatched Merc teapot base? Looks like the carb has the distributor vac port, and the base also shows a port, maybe for auto transmission kickdown? All this modern iron is above my paygrade! :eek:
 
Holley made a model 94 style carb with a four bolt base its called the Bug Spray carb its know as the 2110 carb. They were used for Volkswagen applications. This style Holley was also made with a four bolt base for multiple carb application's in the 70's and 80's the venturis were 1-5/32 along with large throttle plates this larger carb was rated at 365 CFM.
Examples can be found on Ebay usually.
Ronnieroadster
 
Also the later V12 Lincolns used a 4 bolt base on the Holley 94 type carb.
Does the side of the fuel bowl have LZ cast on it ? (Linciln Zepher).
The bowl you have has a vacuum port for Loadomatic distributors though.
V12 Lincolns didn't used Loadomatic.
The base does have the hand throttle hook up though, so maybe an LZ base, and the bowl is not original ?
This type carb was also used with a 4 bolt base on some non Ford truck engines too like IHC.

Sal
 
scicala said:
Also the later V12 Lincolns used a 4 bolt base on the Holley 94 type carb.
Does the side of the fuel bowl have LZ cast on it ? (Linciln Zepher).
The bowl you have has a vacuum port for Loadomatic distributors though.
V12 Lincolns didn't used Loadomatic.
The base does have the hand throttle hook up though, so maybe an LZ base, and the bowl is not original ?
This type carb was also used with a 4 bolt base on some non Ford truck engines too like IHC.

Sal
Click to expand...


It looks like someone put a new bowl on it that is aftermarket so it does not have any markings on it.
 
Wils1514 said:
It looks like someone put a new bowl on it that is aftermarket so it does not have any markings on it.
Click to expand...

The base is not aftermarket its made by Holley used on 2100 and 2110 carbs read my post above :confused:
This Ebay item number 355978450387 shows the four bolt HOLLEY base bolted to a Ford 94 2100 carb mid section you can see the 94 in the center of the carb.
 
Last edited:
You must log in or register to reply here.
Back
Top