Need 3 Speed Gear Shift Rebuilt....

ersatz

ersatz

Senior Member
I have a spare 3 speed transmission for my 46 Ford PU. The ****** was rebuilt, however, the top loader gear shift needs rebuilding. When shifting to 2nd gear the handle has 2-3 inches of sloppy play to the left.

I'm in New Jersey. Can someone recommend a reputable rebuilder to me?

Thanks in advance for your help!
 
Try Charlie Schwendler in Orchard Park NY. His phone is 716/662-9159. He is an old hand at transmissions.
 
Thank you for the referral supereal & VeryTangled! A friend & I took the tower apart and found the gear shift lever to be the problem......badly worn. Now, I need to find a Gear Shift Lever for the ******, or have a machinist do some magic.

Would appreciate any sources to obtain a lever for a 1942-1947 Pick Up. Thanks!
 
any "new" one you buy will have some wear, have a machinest weld the side of the worn linkage and then grind down, I have done a few myself, tried brazing one up and it only lasted about 4 years, the rest I have mig welded and ground down, all of them worked really good
 
You must log in or register to reply here.
Back
Top