Need 29 Sedan measurements please

[John Kennedy]

Hey guys, I'm hoping someone out here has body dimensions for my 29 Tudor Sedan. Body is all stock, no wood involved.

I'm particularly interested in left-right measurements above the roof edges and getting my door alignments right. My right side front-roof area is splayed out some, windshield area seems fine.

Any suggestions? Thanks!

John

 

[John Kennedy]

Anybody? I assume the front upper roof edges are parallel ahead of the doors? Or do they taper inwards some?

 

[4dFord/SC]

You might have better luck on the Model A Forum.

 

[T&A Flathead]

I have a 29 tudor that i can measure, but i don't really understand what you need.

 

[Tudortomnz]

I also have one that I will measure if you explain exactly what you require.

 

[John Kennedy]

I just want to verify that the front roof pieces remain parallel along the roof edge, as opposed to tapering inwards. Is it a straight shot from the doors forward?

 

[merc40]

on my 31 2 dr. they taper down to where meet the top of the door. reguards dick t.

 

[John Kennedy]

OK, that's what I did too. Everything else seems right on so far! Now I just gotta get past my surgery and get back on things!

 

[Tudortomnz]

The outer edge tapers towards the front pillar, exactly as the top edge of the door does.

 

[Mart]

If you think the one side looks all right, you can string a center line down the center and make the bad side match the good side.

Mart.