Neat tool box.

Dave Mellor NJ

Well-known member
I was impressed with this tool box on a sport coupe at the Hellertown, Pa show last Saturday. You usually see them as a plain square box.
 

Attachments

  • Ht34.jpg
    Ht34.jpg
    25.2 KB · Views: 292
  • Ht35.jpg
    Ht35.jpg
    40.4 KB · Views: 328
Does anybody know where these can be purchased? Mike's doesn't list them on their website. Can somebody post more pictures or comments?
 
They are shown in Mike's Catalog, Vol 17 "Commercial" Page Chassis-31. Part # T1000 (28-29) or T1005 (30-31) $165. I think these were even featured on their Wacky Friday Specials a while back. Couldn't find them in their on-line catalog
 
Smith and Johns has them listed. Part # A-18080 for 28/29 (with picture) Part # A-18085 for 30/31 (no picture) It says they are hand made. That may be why they are hard to find. Bigger demand than supply?.
 
I was the original designer of that tool box about 15 years ago and made about 200 or so of them which Mike sold through his catalog. I still have a couple left for future personal projects, but don't know if or who is manufacturing the current copies. I strongly recommend Mike for his quality and conscientious Model A business.
 
It's my car in the picture. I think I bought mine through Mike's a number of years back. They were just getting the ones that could be use with the stone guard on the radiator. I can't find one on any of the online catalogs.
Dick
 
Greg:
Here are some pictures you requested. I hope this helps
Dick
 

Attachments

  • toolBox1.jpg
    toolBox1.jpg
    123 KB · Views: 138
  • ToolBox2.jpg
    ToolBox2.jpg
    130.2 KB · Views: 150
  • ToolBox3.jpg
    ToolBox3.jpg
    95 KB · Views: 128
  • ToolBox4.jpg
    ToolBox4.jpg
    86.9 KB · Views: 108
  • ToolBox5.jpg
    ToolBox5.jpg
    145.2 KB · Views: 134
  • ToolBox6.jpg
    ToolBox6.jpg
    130 KB · Views: 119
  • ToolBox7.jpg
    ToolBox7.jpg
    89.5 KB · Views: 114
It looks like you can not hand start the engine with the box mounted.
Is it a hard mount or can it easily be removed if hand cranking is needed?
 
The box is a hard mount. The engine can not be started with the crank. With 7:1 compression, I don't think I would like to try it anyhow!
 
Back
Top