muffler

F

franksford

Senior Member
i have a 36 ford that needs muffler's that truly brings out the sound of a real strong flat head. any suggestions?

Thanks
Frank
 
I'm happy with truck mufflers local muffler guys said they would sound good not to loud .our car is a47 four door canadian monarch mostly stock headers and radial www
 
Frank I’m sorry I can’t remember the name of this muffler. It’s 2.5” and offset the same as an original and almost the exact same length. I’ve made the entire exhaust including the headers & was a tough job following the correct path on my RHD 35 convertible sedan. Anyway, stock engine, but it sounds really nice and mellow. I opted for a single exhaust to keep the battery under the floor. I’m really happy with it, just enough noise!😁
 

Attachments

  • IMG_5075.jpg
    IMG_5075.jpg
    31.1 KB · Views: 230
  • IMG_9495.jpg
    IMG_9495.jpg
    51.4 KB · Views: 233
danliveshere said:
Frank I’m sorry I can’t remember the name of this muffler. It’s 2.5” and offset the same as an original and almost the exact same length. I’ve made the entire exhaust including the headers & was a tough job following the correct path on my RHD 35 convertible sedan. Anyway, stock engine, but it sounds really nice and mellow. I opted for a single exhaust to keep the battery under the floor. I’m really happy with it, just enough noise!��
Click to expand...
540239


540240
 
Danny, how did you do the bends and is that stainless.
I will have to make one for the 34, as I took it off today to adjust its a small amount and see it has a couple pin holes in it.
You steering boxes are done, they are just at Haydens waiting to be painted
Lawrie
 
danliveshere said:
Frank I’m sorry I can’t remember the name of this muffler. It’s 2.5” and offset the same as an original and almost the exact same length. I’ve made the entire exhaust including the headers & was a tough job following the correct path on my RHD 35 convertible sedan. Anyway, stock engine, but it sounds really nice and mellow. I opted for a single exhaust to keep the battery under the floor. I’m really happy with it, just enough noise!😁
Click to expand...

Well Dan, the picture shows the same style muffler that Ford used to hang on the back of early Falcons :)
 
Mine came with what I call glass packs, not ID on them. I'll see how they sound first. Well first will be starting the rebuilt engine with no mufflers.
 
Lawrie the bends are mandrel bends I purchased on eBay. Yes they’re stainless and they were easy to weld with my mig. The tube I purchased from midway metals in Townsville. It was way cheaper than any exhaust shop could do. Ps there was a couple of tweaks I needed to do and I had to adjust the 2.5” rollers in my manual pipe bender so I could do minor pipe bends without distorting the tube. It sounds great on the 35 engine you built for me.
 
You must log in or register to reply here.
Back
Top