Mounting Bubba's distributor

[Finn Flatty]

Hi guys,
I am installing a Chevy conversion dizzy on an 8ba and would appreciate a lot if someone would post a picture of your distributor mounting solution onto the intake/block. A couple of screws will surely be enough, but a pic of your solution would be more than welcome.

-Pasi

 

[Ralph Moore]

Just drill and tap timing cover for two Allen set screws. That's what I did.

 

[bk53]

likewise

 

[scooder]

I use one screw in the timing cover, works fine.
Just so Pasi can see what we're on about clearly, the drilled and taped hole/holes are up the top of the part the ignition slides into (post hole) not right at the top, just a bit down.
Martin.

 

[Ol' Ron]

Me to, 1 5/16 bolt. Easier to get at when you want to adj timing.

 

[texas webb]

Does anyone have a picture or two of this?Thank you.

 

[V8COOPMAN]

Does anyone have a picture or two of this?Thank you.

Something like this! DD

 

[Finn Flatty]

Thank you so much for your comments, I will follow your guidelines.

-Pasi