German guy
Senior Member
My 30 A had a good quality engine rebuild about 5000 km ago but then sat around for three years while a previous owner died of prolonged cancer. As soon as it warms up I will install the Snyder's partial oil filter and new 6.1:1 head, and grinding the valves (if needed). ???It is extreme overkill to...after the head and filter installation...fill it with Mobil 3000 high detergent 10 W30 oil and run it for a few hours at moderate RPM before draining it, replacing the new filter, dropping the oil pan, scrubbing it and the pump screen, and then shifting to Mobil One 0-W40 full synthetic? No idea how much sludge has built up with the limited use but that oil has been in the engine for at least 4 years with no more than 400 km use at this point. My thought is that this may eliminate any pollutants coming from the new installations as well as break up old sludge that has settled. Is this overly cautious or manic compulsively clean freakish?