Model T Spindle Bolts

Henry/Kokomo

Henry/Kokomo

Well-known member
City
Kokomo
State
IN
Price
$20
I bought a 'lot' of Ford parts and discovered what I believe are Model T spindle bolts (more familiar with V8's) The bolts are forged and pretty hard. There are no signs of being used but there are signs of poor storage - some discoloration and a few pits. Threads are excellent and the lube holes open and clean. They are complete with the proper castle nuts and zerk fittings fitted to the top. Money back if not as represented.
 
Thanks, Steve. The bolts had zerk fittings in them when I found them but, based on your note, I did some digging and found a picture of one with an oil cup installed.

So, today's a good day - - -I learned something new! Will remove the zerk fittings. At least they kept some crud out of the oil holes.

Thanks again,
 
I believe pre-'17 T spindle bolts & tie-rod bolts were indeed threaded for 1/8" pipe but were/are machined for oil. '17 & later models utilized a "flip-top" oiler.
 
You must log in or register to reply here.
Back
Top