model A nut and bolt chart.

[Gerryde]

Hi folks could anyone tell me or put me on the rite track. I have a box full off model A 28-9 engine nuts and bolts is there a chart or a book around that identify the nuts and bolts. Many Thanks.
Gerry (NZ)

 

[burner31]

That would be a nice chart to have...hope someone posts one.

 

[Gary WA]

Model A Ford Mechanics Handbook Vol 1 pages 132-134

 

[Gerryde]

Hi many thanks for the replys and thankyou very much for the charts. The nuts and bolts are all in soaking now.Thankyou.
Cheers Gerry (NZ)

 

[Charlie Stephens]

Remember that the length, diameter and thread size is only part of the story. Some of the heads were domed. Some of the heads were "taller" than todays bolts. The heads didn't have hardness specified on them. You can't just get these at the local hardware store. For a correct restoration you need to restore original fasteners or order them from suppliers that have the correct heads.

Charlie Stephens

 

[BILL WILLIAMSON]

Henry Ford sed, "IT'S ALL JUST NUTS & BOLTS"!---Whut wuz he SMOKIN'??????
"Maybe" he had been awake all night, just pondering, "Who invented THREADS & were the first ones SAE or them COARSE ones????
Bill Curious?

 

[Mitch//pa]

Henry Ford sed, "IT'S ALL JUST NUTS & BOLTS"!---Whut wuz he SMOKIN'??????
"Maybe" he had been awake all night, just pondering, "Who invented THREADS & were the first ones SAE or them COARSE ones????
Bill Curious?

He said "it's all nuts and bolts" and smoked Jamaican me crazy weed
The same stuff Ed / Sonny sells

 

[Gerryde]

Hi yes as I go through them (sorting them out ) i have noticed that some bolts have holes in the head off them and some heads are domed .oh dear what a night meer. Cheers Gerry (NZ)

 

[Jim Mason]

Also check the back of the original parts book...