Model A / B / C Front Motor Mount Identification

[CA Victoria]

Need some help, I have collected these over time and would like to identify them.

I have identified the lower cover from the Ford Garage website as a 33-34.
The mounting holes are different than the A/B cover, I'm assuming this is the correct front mount for the 33-34 4 cyl but the arch in the mount does not center with the crank?
Is the orange front mount for a Model B?
The straight front mount (top photo) has the correct bolt spacing for an A/B cover, is it for an industrial application?

Thanks in advance!

 

[Bob C]

Will the bottom mount like up with the crank if you flip it end for end??

Bob

 

[CA Victoria]

Good call Bob, yes it does center up.

 

[CA Victoria]

Thank you to Mr. Falter (forever4) for the wealth of historical information he has brought to the hobby. www.fordgarage.com

 

[Mike P]

Is the top one for sale by chance???

 

[CA Victoria]

Sorry y'all it's a hobby w/in a hobby looking for the covers and front mounts.

 

[Jim Brierley]

Forever4 is right. 32-33-34 were all different, different lengths (widths)

 

[hardtimes]

Hey Vince,
Do you happen to know of or have a drawing (to make/copy) this front mount :G18T-6030 ?