I own a lathe, a Souix valve grinder, Souix seat tools, hydraulic press, small drill press. I do have to get Babbitt poured and blocks bored by other people since I don't own the tooling to do that myself.
I have restored several Model T Fords, Model A Fords, 1960's Mustangs, a few Pierce Arrows including a 1905 Motorette, 1919 series 38 Roadster, 1936 8 cylinder sedan, a Shelby GT350, several W code 427 Mercury Cougars, an R code Mercury Cougar, a '71 396 (402) El Camino........
I don't ever encounter sticky valves so long as I do my job properly. I certainly have had a sticky valve or two over the years. Adding oil to the gas or oil to the oil is a useless idiotic thing to do from my experience. The "archives" (whatever that means) ????
I am an FAA licensed A+P / Inspection Authorized mechanic with 38 years in the industry. My aircraft work primarily has been involved with Avionics and management over the past 20 or so years. I did quite a bit of turbine engine and APU work in the late 1970's / early 1980's.
One of my favorite things to ask when I take my IA annual refresher every year is when the aviation fuel expert finishes his presentation. Then I ask him what he thinks about Marvel Mystery Oil. Of course it is not legal for use in aircraft and has been linked to fatalities of those poor misguided souls who believe in such nonsense.
As you might imagine there is little respect for things that don't work in the aviation community, as well as within the circles of machinists and automotive restoration experts.
what is the extent of your automotive mechanical background......how many vintage cars have you worked on and what type of work have you done to them?
Have you ever done a valve job? Encountered sticky valves? Stuck valves? If so , how did you deal with the problem? The archives are full of very specific reasons that MMO in fact does assist with several problems created by today's overly dry fuels.... should you choose to read and comprehend them