mini-starter

abbie said:
Thank you for replying. Where did you obtain the switch you use with the mini-starter??
Click to expand...
I lost the information on that, but if you would check with the guys in the Ft Worth "Cowtown A's" he is a member there.
 
Lee,I've never heard of a solenoid exploding.How did that happen?i've seen a lot of them go bad,but never actually open up.
 
abbie said:
I have converted my A to 12 volts. I am planning to install one of the light weight mini starters that requires a solenoid to be added. If anyone has installed one, I would appreciate describing where you put the solenoid and the starter switch, and what type switch you recommend.

thank you in advance
Click to expand...
Ok Abbie, I'll answer your question.. I put the solenoid on the firewall near the starter, I put a quality push button switch in the dash rail to the left of the steering wheel. I would use a quality push switch capable of handling not less than 10 A momentarily.
 
Last edited:
Went to Snyder’s website and read the info on the starter. After reading the posts, still unclear if there is a 12v solenoid built in. Looking at the wiring diagram, it appears that there is. Need to know.
 
The instructions that came with mine said you could use the internal solenoid or bypass it and use an external one. I already had an external one, so I didn't use the internal one.
 
You must log in or register to reply here.
Back
Top