Master Cylinder

[CA Victoria]

Looking for a rebuildable OEM FORD C9AZ-2140-D Master Cylinder. Noted for a 67-70 Mustang or 67-69 LTD with Drum/Drum and Manual Brakes.
Thanks!

 

[smtichy]

Try the Swap Meet specific forum
http://www.fordbarn.com/forum/forumdisplay.php?f=15

 

[JeffB2]

You can get a rebuilt unit from Autozone for $30 part # FENCO M1485 a lot of guys in my 52-59 Ford forum have used them,I recommend those because in many cases they are Bendix cores.A new Bendix from:http://www.rockauto.com/catalog/moreinfo.php?pk=1361498&cc=1332313 is only $38.79 I prefer Bendix as Raybestos is mostly off shore crap and have had bad results with them.You might want to also check out this posted by one of our Group members.http://www.rockauto.com/catalog/moreinfo.php?pk=1361498&cc=1332313

 

[SSsssteamer]

You are money ahead to buy a master cylinder that is already rebuilt. I have found that by the time that you have honed the rust pits out of the old master cylinder, you have exceed its bore limits. Buy a rebuilt one and you will know what you have. With the older master cylinders, there usually isn't a core charge anymore because they don't want your old core back.

 

[Rigley]

Would that piece be suitable for a 53 sedan? I would like to convert to a dual chamber master. No discs.