MARVEL SCHEBLER Carburetor

[Thomas911-76]

Hello,
Do someone know this MARVEL SCHEBLER carburetor on my 40 Ford Deluxe? Have anybody experience with this carburetor? This is a new old stock carburetor.

 

[ford38v8]

Interesting. Perhaps a German product?

 

[Thomas911-76]

No, this is made in USA.


Gesendet von meinem ANE-LX1 mit Tapatalk

 

[ursus]

Marvin-Schebler made replacement carburetors for the Model A and I believe this is what Sears Roebuck and a few other outlets sold. They have proven popular as replacements for the stock Zenith carbs - better performance and gas mileage.

 

[Thomas911-76]

This is my carb.

The inlet diameter is the same as Ford carburetor.

 

[Thomas911-76]

Big picture

 

[tubman]

I would love a pair of those on my Navarro Universal Dual. They would sure get the local flathead "experts" talking.

 

[KiWinUS]

Here’s 2 NOS I have actually have a third somewhere and maybe in its original box will look tomorrow. The neck for air cleaner is smaller than Stromberg. It’s only 2.312. The two original Edmunds oil bath air cleaners on them are the correct size for these carbs. I have two originals for Stromberg carbs somewhere also.
Oh they are sitting on a double throw down rare pre-war Edmunds water heated risers for a V8/60.

 

[Tim Ayers]

Tony,

Are the ones you have single throat?

 

[corvette8n]

My Ford 8N had the single bbl. one.

 

[flatheadmurre]

There was all sorts of aftermarket options for fords since demand was there...seller adapted and sold what they had.
I have a few nos marvels in their boxes to.
They usually had a combined 3/4 bolt multipattern base so could be installed in many different vehicles.

 

[Ian NZ]

There was all sorts of aftermarket options for fords since demand was there...seller adapted and sold what they had.
I have a few nos marvels in their boxes to.
They usually had a combined 3/4 bolt multipattern base so could be installed in many different vehicles.

Do they fit onto 1932 to 1933 Ford V8 single throat manifolds.

 

[richard crow]

there was also a fish carburetor. any body have one of these

 

[flatheadmurre]

Do they fit onto 1932 to 1933 Ford V8 single throat manifolds.

Not the universal base for the 2 barrel...but think they had singles to.

I have Fish M7 carburetors.

 

[mfirth]

This is very interesting stuf. Never heard of before. Love the V8 60 stuf too.

 

[KiWinUS]

Tony,

Are the ones you have single throat?

Tim the three I have are twin throat base plates with single throat venturi. I did have same bolt pattern base plate but single hole models also in the past.
Tim did you get my email wi oil pan pics?

 

[G32]

Do they fit onto 1932 to 1933 Ford V8 single throat manifolds.[/QUOT

I have single throat MS on 1933 single throat manifold for v8


Gene Tulsa

 

[flatheadmurre]

Here´s some pics of the 2 and 1 throat marvels togetter with other odd ones.

 

[Thomas911-76]

OK, thees all look different to my Marvel-Schebler.

 

[scicala]

OK, thees all look different to my Marvel-Schebler.

Gesendet von meinem ANE-LX1 mit Tapatalk

Your carb is a direct replacement for the Holley 94. The others appear to be more of a universal replacement. They made a few different models, including updraft carbs.


Sal