Manifold heater is ugly
- Thread starter billybronco1
- Start date
Gary Gregory
Senior Member
Re: Manifold header is ugly
Doubt you could get paint to stick well on aluminum with all that heat.
Doubt you could get paint to stick well on aluminum with all that heat.
Gary Gregory
Senior Member
Re: Manifold header is ugly
You could use BB-Q grill flat black paint...works well with heat.
You could use BB-Q grill flat black paint...works well with heat.
billybronco1
Well-known member
Re: Manifold header is ugly
Hey I bet that looks cool, is it flat or gloss black? How is it holding up to the heat, any special prep? can you post a pic?
Hey I bet that looks cool, is it flat or gloss black? How is it holding up to the heat, any special prep? can you post a pic?
glenn in camino
Well-known member
Re: Manifold header is ugly
I don't like manifold heaters because they make it difficult to work on the distributor.
I don't like manifold heaters because they make it difficult to work on the distributor.
glenn in camino
Well-known member
Re: Manifold header is ugly
They make it difficult to work on the distributor.
They make it difficult to work on the distributor.
mass A man
Well-known member
Re: Manifold header is ugly
Yes, If you plan on having an Otwell manifold heater, one can't access the distributor lock screw. On the other hand the Autolite manifold has a hole in the casting just opposite the screw for dist. The finish on the top cast iron Autolite cover was silver originally, I know it doesn't go with Ford engine green. Or any other color for that.
Yes, If you plan on having an Otwell manifold heater, one can't access the distributor lock screw. On the other hand the Autolite manifold has a hole in the casting just opposite the screw for dist. The finish on the top cast iron Autolite cover was silver originally, I know it doesn't go with Ford engine green. Or any other color for that.
BILL WILLIAMSON
Well-known member
Re: Manifold header is ugly
Well, BB, If you don't like it, just remove it forever & dress for the COLD!
Bill W.
Well, BB, If you don't like it, just remove it forever & dress for the COLD!
Bill W.
ian Simpson
Well-known member
Re: Manifold header is ugly
When you live way down south in Boston, why do you need a heater?
When you live way down south in Boston, why do you need a heater?
DougVieyra
Well-known member
Re: Manifold header is ugly
The heater cover WAS made during the Model A time frame. However it was cast iron, not aluminim. Like the modern day aluminum reproductions, it went on and off easily and quickly, both for summer driving, and for accessing the distributor.
Mass A Man: The Otwell Health Heater at first (1928-29) came with a straight top and did not allow for access to the distrubitor. A major design flaw. This was corrected however, in the later amended model (for 1930 & '31) that had a dip in the middle of the top, to allow for access to the distributor.
- Doug Vieyra, Eureka, Calif
The heater cover WAS made during the Model A time frame. However it was cast iron, not aluminim. Like the modern day aluminum reproductions, it went on and off easily and quickly, both for summer driving, and for accessing the distributor.
Mass A Man: The Otwell Health Heater at first (1928-29) came with a straight top and did not allow for access to the distrubitor. A major design flaw. This was corrected however, in the later amended model (for 1930 & '31) that had a dip in the middle of the top, to allow for access to the distributor.
- Doug Vieyra, Eureka, Calif
BILL WILLIAMSON
Well-known member
Re: Manifold header is ugly
I remember Chief sometimes replaced distributor parts, with the distributor IN PLACE. "Maybe" it was stuck?? Everything, except the bushings, can be diagnosed or replaced with the dist. IN the engine.
Bill W.
I remember Chief sometimes replaced distributor parts, with the distributor IN PLACE. "Maybe" it was stuck?? Everything, except the bushings, can be diagnosed or replaced with the dist. IN the engine.
Bill W.
billybronco1
Well-known member
Re: Manifold header is ugly
It gets cold down here too but it came with the car. If there was no hole through the fire wall I probably would leave it off. I decided to paint it black and modify how it is mounted so it does not look so bad. It does work and it is a conversation item.
It gets cold down here too but it came with the car. If there was no hole through the fire wall I probably would leave it off. I decided to paint it black and modify how it is mounted so it does not look so bad. It does work and it is a conversation item.
Gary Gregory
Senior Member
Re: Manifold header is ugly
The one i have has...SNYDERS INC. PHILA. PA. its cast not alum. ...sits nicely on manafold...i use 2 wires to hold it in place...easy to remove.
The one i have has...SNYDERS INC. PHILA. PA. its cast not alum. ...sits nicely on manafold...i use 2 wires to hold it in place...easy to remove.
mass A man
Well-known member
Re: Manifold header is ugly
By Jove Doug! (in Eureka,Ca.), You're correct! I dug out a few heater manifolds I have and found one with the "dip" in the middle. I'm used to seeing the flat across Otwell's. Shown a picture of the dippy manifold.--Pete.
By Jove Doug! (in Eureka,Ca.), You're correct! I dug out a few heater manifolds I have and found one with the "dip" in the middle. I'm used to seeing the flat across Otwell's. Shown a picture of the dippy manifold.--Pete.
Last edited:
Purdy Swoft
Well-known member
Re: Manifold header is ugly
Yes, I also have one of the Otwell health heaters like Doug mentioned and the one pictured above. It was on a 31 tudor that I drove in the mid 60s . I haven't used it in nearly 50 years. It doesn't get that cold here. I don't like any manifold heater. They make the car TOO hot inside and put too much heat on the distributor.
Yes, I also have one of the Otwell health heaters like Doug mentioned and the one pictured above. It was on a 31 tudor that I drove in the mid 60s . I haven't used it in nearly 50 years. It doesn't get that cold here. I don't like any manifold heater. They make the car TOO hot inside and put too much heat on the distributor.
DougVieyra
Well-known member
Re: Manifold header is ugly
Purdy - When the "Otwell Health Heater" people redesigned their heater (with the dip in the middle of the top), they also added a 'Heat Escape' door at the rear of the top, to allow heat to escape out into the engine compartment and NOT go into the interior of the cab. When the heater door to the firewall was closed and the connecting pipe from the heater to the firewall was removed for summer driving, this worked very well to prevent heat from entering the cab.
Also, on the new 'Improved' models with the 'dip' in the middle of the top (to allow access to the distributor), the dip creates a comfortable air space between the heater top and the distributor condensor. This increases the life expectance of the condensor - especially if an A&L 'heat proof' condensor is used.
- Doug Vieyra, Eureka, Calif
Western Sales Division, Othwell Health Heaters, Inc.
Purdy - When the "Otwell Health Heater" people redesigned their heater (with the dip in the middle of the top), they also added a 'Heat Escape' door at the rear of the top, to allow heat to escape out into the engine compartment and NOT go into the interior of the cab. When the heater door to the firewall was closed and the connecting pipe from the heater to the firewall was removed for summer driving, this worked very well to prevent heat from entering the cab.
Also, on the new 'Improved' models with the 'dip' in the middle of the top (to allow access to the distributor), the dip creates a comfortable air space between the heater top and the distributor condensor. This increases the life expectance of the condensor - especially if an A&L 'heat proof' condensor is used.
- Doug Vieyra, Eureka, Calif
Western Sales Division, Othwell Health Heaters, Inc.