Mallory points

I'd be surprised if Mallory didn't use points from a production car in their distributors. Find out which car and your job should be much easier. Failing that, I'm sure it would be possible to graft in a set of more readily available points. I have just received a deceased estate of stuff from a mechanical workshop. It included about a dozen Bosch (good stuff) points, all the same number. With a little work, I grafted them into an original Model A distributor. I doubt I will wear out one set, let alone that many.
 
Hasn't been responding since March last year after saying he was moving.

He logged in last April 1st according to his profile. I'll look and see if I have any other contact information for him.
 

Attachments

  • raybee.jpg
    raybee.jpg
    12.7 KB · Views: 12
If you cannot post a pic, look on line and see what the part number is and I can refer to it,I have a few mallory sets on hand , you can private message to me and I will see what I have to help you .
 
Try FleaBay
I have a very early Mallory that uses the pop out ignition. The points are unobtainable. I bought some Phenolic sheet and a set of V8 points to create a couple sets for this restoration. Luckily there was one set I can copy.
 

Attachments

  • body 2.jpg
    body 2.jpg
    33.1 KB · Views: 23
  • point plate.jpg
    point plate.jpg
    37.4 KB · Views: 32
If you have an original set of points the on is stamped on the vert stationary tab
25042 sounds about right for non dual point
I forget pn of booster point
J
 
Glynn, If you were asking me what part number, I used Bosch GB354 points. They are not a straight swap over. I had to use my noodle a bit to get things right. If you want to know the ins and outs, contact me.

Mallory have a part number on them. The old two piece cap ones use 24205 which are like hens teeth and cost about US$50 if you can find them.
 
A google search shows lots of " Standard Ignition Company part#25042" available, but pricey.
 
Back
Top