Looking fo the right u joint

[Terry Wilkerson]

I have installed a 1990 ford ranger rear end in my 50 ford custom. Does anyone know of a conversion u joint that will work with the ranger rear and the stock 50 drive shaft?

 

[Gene1949]

TRW used to list many different "combos". When I did mine (T-10 4 speed to a Granada) went to wreaking yard and found Chevrolet driveline the right length. "upconverted" from the T-10 to the dl and "downconverted" to the Grenada.

 

[Gene1949]

the U joints were NOT listed by application but by size (width and bearing diameter).

 

[Bob C]

The Speedway link shows how to identify u-joints. The video
is not very good but the rest of info is good.
https://www.speedwaymotors.com/the-toolbox/u-joint-identification-types-of-u-joints-explained/29183

 

[Gene1949]

https://www.moogparts.com/technical/bulletins/tech-tips/finding-the-right-replacement-u-joint.html

 

[Terry Wilkerson]

I found it. 1310 to 2R is what I need. Looks like I'll have to order it.

 

[Ggmac]

I just finished that install , 1310-1330 excel 95-0134 or Spicer5-134x . Make sure you have the correct bolts .

 

[uncle buck]

I just finished that install , 1310-1330 excel 95-0134 or Spicer5-134x . Make sure you have the correct bolts .

NAPA UJ353 is also the same as these