Logo Lites USB Charge Port

Apparently you can just wire in a cigarette lighter and use a regular charger. I made my own dedicated charger before I knew this because I didn't want to spend the money. The logo lites unit seems nice though, and easy to install.
 
You need to make sure the outlet to the plug will recognise 6v and deliver the 51/2v required. Isolate the plug.
 
This is what I made for mine, mounts on 2 of the terminal box screws. It only charges at 500mA but that was a deliberate move to keep the load on the generator to a minimum during night driving. Best part is it cost me $2 for the box, the rest I scavenged or had lying around.
 

Attachments

  • IMG_7662.jpg
    IMG_7662.jpg
    28.2 KB · Views: 35
Hello Shew, I purchased mine directly from logolite. I mounted mine directly to my steering column on the very bottom, easy to reach and kinda out of sight. I secured it with 2 or 3 zip ties with a rubber pad to hold it in place, there is also a strong magnet on the unit to hold it in place. As for power connection I went right off my junction box on the firewall, was an easy setup. The unit has been on for a few years and Ive had no issues at all. Good luck with yours and Happy Motoring, :D Dutie
 
Hello Shew, Sorry for misreading your post. My post was for the signal light installation and not the charge port....anyway good luck with your setup. Dutie
 
You must log in or register to reply here.
Back
Top