art ebeling
Well-known member
I can't find any vendors with American made adjustable lifters in stock. Are the foreign made lifters good to use? Do they still have problems with the adjusting bolts not being tight? Thanks, Art
lifters
- Thread starter art ebeling
- Start date
tubman
Well-known member
For the last engine I had built, the builder installed an Iskenderian MAX-1 cam and kit. It came with a set of 185G springs and a set of the solid-bodied Isky "tractor" lifters. When I opened the box they came in, I was disappointed in their heft.
When I picked up the engine from the rebuilder, he asked me why I had used those heavy "slugs" in what otherwise was a performance engine. I answered that it was what everyone did, and afterall, they came as a part of the kit. He pulled out one of the original Ford lifters and I was surprised at how light it was. That got me thinking and I called Fred at Southside Obsolete and I was able to buy a set of NOS Ford lifters from him for a helluva lot less than any aftermarket adjustables. SBC valves are cheap enough and enough longer than the originals to make up for any reduced base circle on the cam.
The next engine I build will get stock lifters if I can help it. Just another point of view.
When I picked up the engine from the rebuilder, he asked me why I had used those heavy "slugs" in what otherwise was a performance engine. I answered that it was what everyone did, and afterall, they came as a part of the kit. He pulled out one of the original Ford lifters and I was surprised at how light it was. That got me thinking and I called Fred at Southside Obsolete and I was able to buy a set of NOS Ford lifters from him for a helluva lot less than any aftermarket adjustables. SBC valves are cheap enough and enough longer than the originals to make up for any reduced base circle on the cam.
The next engine I build will get stock lifters if I can help it. Just another point of view.