late flathead in early chassis, hoses.

[derek costello]

The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038.

This offset cut off about 6 1/2' long will solve the problem of hose alignment
on this engine /frame combo.

Like it was made for Flatheaders.

 

[skidmarks]

The rad hoses for the lower fit between the late 8BA engine and early chassis
are Ford Bronco 1986 to 91 Carquest - Dayco # D71038.

This offset cut off about 6 1/2' long will solve the problem of hose alignment
on this engine /frame combo.

Like it was made for Flatheaders.

What year chassis?

 

[RalphM]

Old number was 21236(Carquest) and I have them on my 8BA in 32 chassis.

 

[HambBurglar]

I also used a Gates hose #21236 for 8BA in ‘32 frame. Worked well.

 

[Mart]

Are these numbers good for 59A in a 32 frame?

 

[John R]

The lower hose depends greatly on the vertical positioning of the engine. For my 8BA in a 32 frame, I used a Gates 20151 (49-53 Ford) and shortened it a bit. The 20151 has 1/4" less offset than the Gates 21236.