CA Victoria
Well-known member
- City
- PR
- State
- CA
- Price
- see ad
I have a Kwikway LBM, Line Bore Machine for sale.
1-60" bar with 2-60" rails, I'm guessing this was originally sold as a "Ford" kit. The rails and boring bar are marked for the different Ford settings.
The set has four bridges and four bearings with the two collars and springs to support the bar while setting it.
I have the Ford bar setting fixtures (2) for A,B,V8, Fordson and the two bar micrometers for facing. I also have the Starrett micrometer for setting the tool bits. I have two bar clamps, the bar drive assm. with a hand crank. I have a partial set of 5 of the KW main cap bolts that come with their LBM set.
I have a few new/used carbide tool bits for the bar, and a RARE NOS set of bronze half nuts for the drive assm.
Comes with a home built stand on wheels that is universal, but currently set up for an A Block, it has a removable chip pan below the engine, 3/4 hp gear reduction motor and Fwd/Rev switch and a receptacle on the stand to plug a light or tool into.
$2500
Unfortunately due to the size and weight of these pieces, shipping is not possible.
No Trades
Will not part-out
No extra parts available.
drop me a line if you have any further questions.
1-60" bar with 2-60" rails, I'm guessing this was originally sold as a "Ford" kit. The rails and boring bar are marked for the different Ford settings.
The set has four bridges and four bearings with the two collars and springs to support the bar while setting it.
I have the Ford bar setting fixtures (2) for A,B,V8, Fordson and the two bar micrometers for facing. I also have the Starrett micrometer for setting the tool bits. I have two bar clamps, the bar drive assm. with a hand crank. I have a partial set of 5 of the KW main cap bolts that come with their LBM set.
I have a few new/used carbide tool bits for the bar, and a RARE NOS set of bronze half nuts for the drive assm.
Comes with a home built stand on wheels that is universal, but currently set up for an A Block, it has a removable chip pan below the engine, 3/4 hp gear reduction motor and Fwd/Rev switch and a receptacle on the stand to plug a light or tool into.
$2500
Unfortunately due to the size and weight of these pieces, shipping is not possible.
No Trades
Will not part-out
No extra parts available.
drop me a line if you have any further questions.
