knocking noise 8ba

Seeing the crankshaft is not the orginal,My guess you have a clearance problem,maybe to much end play,and hitting connecting rod,block,any chips in oil.
 
Not to beat this to death but I had to cut .030 off the domes of my egge pistons just to get .050 in the chamber. I cut them from .030 in the center to .000 at the edge reshaping the crown.

I can't think of anything else exept maybe to check the thrust on the crank and cam........
 
well my pistons are new from egge what about ross pistons,, its about time someone told egge of this problem reds should have told them
 
You must log in or register to reply here.
Back
Top