Just bought an Early Econoline

Ken Crans

Well-known member
Hey Fellas, Been in the flathead world. Thought i'd jump to the other side. Bought this 62 Ford Econoline off of CL for a 1000. Need some parts. Engine and body...170 six with a 3 speed. Falcon will work on engine parts.
 

Attachments

  • 62 Ford Econoline 001.jpg
    62 Ford Econoline 001.jpg
    96.2 KB · Views: 27
  • 62 Ford Econoline 002.jpg
    62 Ford Econoline 002.jpg
    86.3 KB · Views: 22
  • 62 Ford Econoline 005.jpg
    62 Ford Econoline 005.jpg
    70.3 KB · Views: 23
  • 62 Ford Econoline 008.jpg
    62 Ford Econoline 008.jpg
    73 KB · Views: 20
  • 62 Ford Econoline 004.jpg
    62 Ford Econoline 004.jpg
    102 KB · Views: 21
Body and trim parts are NOT going to be easy to find . Thankfully, because the 170 engine was used in Falcons , you could be in good territory. I used to use N A P A and Old Dominion Mustang in Ashland Virginia for trim. Course too, I also used to manufacture custom van parts for that van myself too.
 
I don't see much trim missing as these vans didn't have much to begin with. The hardest things to find that I recall are the headlight trim and these look like they're in good shape going by the photos. Depending on your area, the self service yards should still get them.
 
Last edited:
Back
Top