jacking point 35 Ford

[JJOHN]

In jacking up the rear wheels of my 35 Ford sedan with a floor jack-what is the best and safest point to use for this lift.

 

[JM 35 Sedan]

Usually, if I want to jack up the complete rear (both sides at the same time), I will put the lift part of the floor jack under the center of the banjo housing. If I want to jack up one side of the rear, I will use the lower part of the radius rod that's under the axle tube or the axle tube itself. Just my way of doing things

 

[RB35]

I remember reading somewhere that it's OK to jack at the banjo center point, but then support it with jackstands out by the wheels or the frame. Point was to not support it at the banjo.