Interior Sun Visor 1940 Standard Sedan

DAVIDBELCHER

Junior Member
I’ve recently acquired a 1940 Sedan without any interior sun visors.
Can anyone please advise the options for fitting and recommend where I can find the right items - reproduction is fine.
 
Last edited:
Deuce has led you to a correct visor for your Ford V8 (aka standard). Your model came with only a left-hand visor, the right hand being optional. Me? For $20, I'd waste no time buying the one Deuce offered the link to.
 
If your headliner is already installed is there enough slack in it to "fit" the sun visor?
If the headliner is already pulled tight, it may not stretch enough to allow the bracket to seat on the metal.
If you don't have the headliner already installed you are ok.
 
Last edited:
I believe they are the same. Here's my 40. Driver side and Pass. side.
I will measure mine if you desire.
 

Attachments

  • IMG_5794 (Small).jpg
    IMG_5794 (Small).jpg
    34 KB · Views: 6
  • IMG_4221b.jpg
    IMG_4221b.jpg
    228.7 KB · Views: 5
  • IMG_4218b.jpg
    IMG_4218b.jpg
    212.4 KB · Views: 6
Last edited:
Bob Drake is showing chrome visor brackets/frames in stock: https://bobdrake.com/products/1935-48-closed-car-sun-visors-chrome?_pos=1&_sid=1216eda79&_ss=r

Question for Kube, Don Cox, or anyone else who knows, were the visor brackets actually the same 1935-48 (except for finish) or were there differences... And what were they? (inquiring minds)
Karl, you're asking me? Heck, you're the guy I typically seek knowledge from.
I can tell you this with a 99% degree of confidence; '35 to '41 utilized the same bracket. After that, my confidence in providing a correct replay drops to about 85%.
I do believe the bracket is the same through the years questioned sans finish and possibly the length of the rod.
 
Back
Top