Interior sun visor 160B dimensions

[wsaric]

what are the dimensions from center line to the wood blocks. I am replacing all the wood in the roof and do not have the dimensions/location where the sun visors wood blocks go.

 

[Vern]

This is a photo posted here sometime back of the roof wood for a sedan in response to a similar question about visors in a 190A Victoria. Unfortunately, it has no dimensions, but may help. My Victoria doesn't have such blocks, the visors are simply attached to the bottom of the first rib.

 

[wsaric]

Thanks The Picture helps and I believe I can make it work

 

[160B]

I just measured mine, the interior is in the car and the block on the driver's side is 10 inches from the edge of the upholstery to the edge of the block and the block is approximately 2 1/2 inches wide.

Hope this helps!

 

[56servi]

My wife is putting in the Headliner on our 160B today, so I got some pictures.

Dims are from the left side rail (inside)
1st block = 6"
2nd block = 29"
inside to inside edge of blocks = 20"
block dims = 3" x 8 1/2"

 

[160B]

I just measured mine, the interior is in the car and the block on the driver's side is 10 inches from the edge of the upholstery to the edge of the block and the block is approximately 2 1/2 inches wide.

Hope this helps!

My wife is putting in the Headliner on our 160B today, so I got some pictures.

Dims are from the left side rail (inside)
1st block = 6"
2nd block = 29"
inside to inside edge of blocks = 20"
block dims = 3" x 8 1/2"

I just remeasured mine and measuring from the same reference as 56servi I get 6" space to the block and the block is 3".

 

[wsaric]

thanks all