Intake Manifold ID

[Anteek29]

Is there a chart available out there that shows which intake manifolds go with which Y blocks by year? I've been told the manifold COAE 9425 F on my '55 Vic 272 is probably for a truck engine? The dissy is a '57 upgrade.

 

[dmsfrr]

... I've been told the manifold COAE 9425 F on my '55 Vic 272 is probably for a truck engine? The dissy is a '57 upgrade.

2 bbl Y-block trucks from '57 to 63/'64 and all 2 bbl Y-block Ford cars from '60 to '62.
As shown at this link...

http://y-block.info/casting/intake.html
.

 

[Anteek29]

WOW...Perrrrrrrrfect! Downloaded & printed. Thank you!

 

[dmsfrr]

The same website has more pages and info. Some isn't as thorough as you might hope and there may be a few typos... but it general it's a good site for information.

http://www.y-block.info/main.html


.

 

[paul2748]

The CO is 1960 (C = 60's; O = 1960> Probably used after that too, possibly up til 64 (last yBlock year). Might have been used in the 60-62 sedans. All the other letters will tell application.

 

[dmsfrr]

... the other letters will tell application.

C = 60's, 0 = 1960 (& later as needed), A = all/not model specific, E = engine, 9425 = intake manifold, F = revision designation

https://www.fordification.com/tech/datecodes.htm

.

 

[KULTULZ]

COAE (C0AE) 9425 F

This is an ENGINEERING CASTING I.D. NO. -

PN PREFIX -

C = 1960's Decade
0 = 1960
A = FORD (Full Size)
E = ENGINE GROUP

9425 = Is the ENGINEERING BASIC PART NUMBER

F = PN SUFFIX That Indicates Exact application(s).

(The DATE CODE will narrow the application down further along with the FOUNDRY CASTING ID NO.)

1960-62 FORD 292 2V
1960 EDSEL 292 2V
1960 MERC 312 2V
1961-62 MERC 292 2V
1960-64 TRUCK

 

[Anteek29]

Thanks, fellow Barners!