installing pistons

K

kurt v

Well-known member
EGGE pistons notch to front,rod pisser to inside or outside, or does it matter?
looking down from the top.
thanks kurt
 
The piston notch faces forward. The connecting rods are installed so you can see the number stamped on the sides of the big end when looking at them from the side of the block along the oil pan rail side. When the rods are installed in this manner the oil squirt hole will be facing in the correct direction.
Ronnieroadster
 
everything going great UNTIL egge only put 12 ristpin clips in the bag, there sending the missing 4, why always me?
 
You must log in or register to reply here.
Back
Top