Installing new shock links on a 37

Tom in SW VA

Well-known member
I have one question: Is there any spacers or rubber grommets or ??? on the shock links (dogbones) on the 37 shock? It looks like metal on metal. Is that correct??

Thanks in advance :)
 
the 37 uses the one piece shock link (not the dog bones or 32-35) it has rubber bushing inside around each stud.
 
Thanks for the Info Guys:) I only have a Houdaille Book for reference :confused::confused:
I will make a foot note That the book is not correct. :eek::eek::eek:
BILL W
 
Re:Follow up on Installing new shock links on a 37

Just a follow up on the 37 links 3" vs 4"
If I did this correct there should be 2 pictures or links of pages out of my Houdaille book.
I have YELLOW Highlighted the sections.
If Gary in La. or any one else can post the pages out of the 1937 Parts book I would like a copy.
As we know just because it in a book does not make it correct.

BILL W
 

Attachments

  • IMG_0800-rev.jpg
    IMG_0800-rev.jpg
    66.9 KB · Views: 37
  • IMG_0801-rev.jpg
    IMG_0801-rev.jpg
    59.3 KB · Views: 36
Bill: Your information was printed after 1941. Notice the part number 11A which was not used until that time. The Dec 1936 Ford Chassis parts book list 48-18055-A as rear and 78-18055-A as front. 48- is a 3" and 78- is 4". Ford tried hard to eliminate parts and if one link would do the job of 2, then one it was, but it took time for this to happen. The "green book" printed in Nov.1950 still list the same links for 37 as the 36 book.
 
Sorry for late response. Terry's info is right on and the only picture chart I have seen is in the "Green Bible". Part numbers are also substantiated in the 1938-'41 Ford Chassis Parts List dated May,1941.
 
Had to think about what you were saying.
I never thought of the date the book us publishes as being a factor.
So in my serch for correct knowledge would it be possable to get A copy of that page?
THANKS BILL W
 
Back to the original question here. Every picture I see of shock links for a 1937 ford car do not show any bushings. Are they supposed to have bushings??

Dave
 
Back
Top