Increase HP on A

For BCCHOPIT@AOL.COM!!
Question !! What carbs using with this intake? see the pic
 

Attachments

  • DSC00753.jpg
    DSC00753.jpg
    29.1 KB · Views: 22
97 strom or a ford 94 are too much carb,you would have to modify them. ken ct. You dont get something for nothing,theres always a cost.
 
ken ct said:
97 strom or a ford 94 are too much carb,you would have to modify them. ken ct. You dont get something for nothing,theres always a cost.
Click to expand...



You know carbs more then me but the only thing I had to do is put some bigger jets in it. Yes I know I said bigger jets. My intake has small runners and runs real cold and was running real lean. It makes good power but gets ****** gas mileage :rolleyes:

HEADER.jpg

I now run a 1" carb spacer
 
I think the Strombergs 81' may be possible to get in my country, because these carbs came factory in the Flatheads...
 
81's came on 60 hp cars only
also bill stipe (spelling???) makes a different dist cam that gives you more dwell
supposed to be goof for a bit more hp
tk
 
Thank kelley now I must go to the "chacarita" said in my country refer to a junkyard, I must find a pair of strombergs carbs muejejejej!!
 

Attachments

  • 100_0489-1.jpg
    100_0489-1.jpg
    49 KB · Views: 95
Yes is a picture from the web!!
In my country they could find the car with the flathead in very rusty condition. there are no culture about hot rodding, In many times could find a restored car, and the most wanted are a coupes.
 

Attachments

  • 32312-ford-1940-sedan-2-puertas-G.jpg
    32312-ford-1940-sedan-2-puertas-G.jpg
    30.9 KB · Views: 38
Last edited:
You must log in or register to reply here.
Back
Top