Ignition switch nuts
- Thread starter Racur96
- Start date
Mike V. Florida
Well-known member
Same style.
Tom Wesenberg
Well-known member
Yep, you need 3 of those insulated special nuts.
If you use the aftermarket ignition switch then you have to watch that the switch contacts don't touch the gas tank, as they did on my 29 Tudor. I got lucky and just happened to touch the coil and feel it was getting warm right after I reinstalled the instru,ent panel. I had to bend the terminals to the side for clearance.
If you use the aftermarket ignition switch then you have to watch that the switch contacts don't touch the gas tank, as they did on my 29 Tudor. I got lucky and just happened to touch the coil and feel it was getting warm right after I reinstalled the instru,ent panel. I had to bend the terminals to the side for clearance.