I have long wondered

H

harryc

Senior Member
Do all model A dipsticks have the F in the same location. I just change and add the oil from the 5 qt container and add until I reach the F but on different cars it seems to take more to reach the F
 
Only takes 4 1/2 quarts on a running engine. 1/2 quart is left in dipper tray.

That should be the end of story.

If finger opening is distorted, reading could change up or down.

I would add correct amount of oil and adjust dip stick accordingly. Enjoy.
 
here you go....both styles and length
 

Attachments

  • stick 3.jpg
    stick 3.jpg
    136.2 KB · Views: 191
  • stick 4.jpg
    stick 4.jpg
    164.8 KB · Views: 183
harryc said:
Do all model A dipsticks have the F in the same location. I just change and add the oil from the 5 qt container and add until I reach the F but on different cars it seems to take more to reach the F
Click to expand...


Make sure both ends of the dipstick are fully inserted in the hole - that means the short piece below the handle as well as the long piece with the F.
 
harryc said:
I don't check my oil with the engine running
Click to expand...

Hey Harry,
You may have figured this out on your own, as I know that you've owned Model As and other fine old cars forever.
I keep enough oil in the crankcase to register HALFWAY between the full and low mark. I think that that would represent a half quart. That way, if you have a engine with leaks or tends to leak, this leaking will lessen or quit somewhat....compared to running full or more with oil:).
 
You must log in or register to reply here.
Back
Top