hub / drum id

[aussie merc]

got gifted some parts from an older member just trying to id them all are wide 5 setup fronts are 1 piece hub drum with screw in caps 2 have ribbed drums 2 are plain and what year did ford go from large bearing to small bearing on the rear hubs .Yes i know pictures would help but unable to post at this time

 

[V8COOPMAN]

got gifted some parts from an older member just trying to id them all are wide 5 setup fronts are 1 piece hub drum with screw in caps 2 have ribbed drums 2 are plain and what year did ford go from large bearing to small bearing on the rear hubs .Yes i know pictures would help but unable to post at this time

Drum on the left in picture is '36 ONLY. '37 - '39 did not have the ribs. '36 also has the longER bearing snout.

Coop

 

[aussie merc]

thanks coop but they look like drum+hub the ones i have are cast as 1 piece

 

[V8COOPMAN]

thanks coop but they look like drum+hub the ones i have are cast as 1 piece

Do they look like these EARLY '36s?

Coop

Many of the more-normal looking '36s have this star pattern cast into the back side, supposedly a '36 feature ONLY!

.

 

[aussie merc]

well it would appear i have 1 fullset of 36 hubs and drums if 36 ran large rear wheel bearing but the others are a mystery they are one piece short snout steers 1 pair ribbed 1 pair plain both with screw in caps and are not the spoked type shown above

 

[rich b]

Not all wide 5's were hub & drum construction; many were one piece units, some with fins. In fact, I think I have come across more one piece drums than the two piece.

 

[aussie merc]

 

[aussie merc]

what a mission to post those

 

[petehoovie]

View attachment 532374

View attachment 532375View attachment 532376