J John06 New member Aug 11, 2024 #1 The starter ring needs to be replaced. I pulled the engine and have removed the 4 bolts holding the lower bell housing. What's next?
The starter ring needs to be replaced. I pulled the engine and have removed the 4 bolts holding the lower bell housing. What's next?
A alanwoodieman Well-known member Aug 11, 2024 #2 do you have a two piece oil pan? if not you must remove the oil pan to get the flywheel out
A alanwoodieman Well-known member Aug 11, 2024 #3 do you know what engine you have--which should have been my first question--markings on the heads--pictures --description which will help us determine your engine
do you know what engine you have--which should have been my first question--markings on the heads--pictures --description which will help us determine your engine
aussie merc Well-known member Aug 11, 2024 #4 if engine is of 39 era sump and flywheel lower half are one piece
rotorwrench Well-known member Aug 13, 2024 #6 The truck pans have a trap door so they could remove the 11 inch clutch on those so equipped. The car pans, not so much.
The truck pans have a trap door so they could remove the 11 inch clutch on those so equipped. The car pans, not so much.