29 model-a
Senior Member
Looking for a picture of a 29 truck firewall, need to know how many holes should be in it, I'm thinking I need to fill a few. Thanks Pete
How many holes in 29 firewall?????
- Thread starter 29 model-a
- Start date
29 model-a
Senior Member
29 model-a
Senior Member
Sorry for the bad picture, you can see one hole on the left and there's another on the right but a little lower. Pete
Russ/40
Well-known member
The through hole on the left is a no, the dimple on the right is a no. There should be about a 1/2" hole on the left as we face it. On a down diagonal from the name plate lower left hole, and a 1/4" hole at the extreme right lower corner. From my March 29' RPU. I think this is accurate. Other RPU owners please confirm.
BILL WILLIAMSON
Well-known member
YEA! looks like they MISSED the door handle, THAT'S A KEEPER!
Bill W.
29 model-a
Senior Member
So I do need to fill the two holes
In?
In?
Tom Wesenberg
Well-known member
Yes, the hole on the edge of the V needs to be filled and the dent on the driver's side needs to be removed. I hope that hole isn't a bullet hole into the gas tank.
Steve Plucker
BANNED
Some tanks did not have that 1/2" hole on the left as we face it...Some did...However when the Vaccume wipers came out, olny then did they start appearing on all tanks. There should not be a 1/4" inch hole at the extreme right lower corner (as we are facing it in the photo).
Pluck
Russ/40
Well-known member
Thank You Pluck!
29 model-a
Senior Member
Tom that is a bullet hole, but it only made through the first layer and dented the tank, and there is a hol where the dent on the driver side, and plucker I wasn't going to add hole��figured if there isn't any the. There should t be any others. Thanks guy s for the help Pete