Horn button rod length

txturbo

txturbo

Senior Member
Ready to order some parts for my steering column. But I see there are 3 different lengths for 30/31s. Neither of my steering columns has a horn button rod installed so I don't know what length I need. My replacement column has the shaft....I'm assuming I can measure this daft to determine which goth button assembly I need to order. The question is.... Where do I measure to and can it be done without completely disassembling the steering box?
 
Better to look at the chart in Bratton's catalog. It shows which ones are correct for which columns. It might be on their web site too.
 
That's what I was looking at...it just lists them by length....but I don't have and old one to measure.
 
Yes there are three different lengths shown in the catalogs for 1930, but most 1930 vehicles and all 1931 use the 45 31/32 rod (A3616-H). The demand for the other two rods is very small.
 
barnstuf said:
Yes there are three different lengths shown in the catalogs for 1930, but most 1930 vehicles and all 1931 use the 45 31/32 rod (A3616-H). The demand for the other two rods is very small.
Click to expand...

Thanks......the column I'm using for a replacement could be anything ....I don't know what year it is.
 
That rod is actually for the light switch as well. Maybe it's listed under that classification...
 
You must log in or register to reply here.
Back
Top