Hood supports

[goodcar]

Try these simple little guys from Snyders $11.95. Hood prop part number 16608-X.

 

[Ivan in southeast va.]

I like this one as well, nice and simple. From Snyders as mentioned above.

 

[The Master Cylinder]

I bought the same ones as in post#8 but I got no instructions. Not to hard to figure out how to put them on but...

Should I use the small ends or the long ones, or is it just a matter of preference.

I believe the shorter ends are for the '30-31 and the longer are for the '28-29.

 

[Garwood]

I have this type in both of my Model A's, and I recommend it.

Holy cow, that is the cleanest engine I've ever seen.



Thanks for the picture of your prop. I've been wanting to get one for my truck but there are 3 different types and wasn't sure which ones I wanted to get.

 

[JC60B]

My '29 Fordor has a set on the upper rad tank. I read 28/29's came that way from the factory. But the hood doesn't seem to come even close to resting the hood on.

 

[JC60B]

Turns out they were bent inwards. Seem to work now.