Holley power valve

[walter123]

I am looking for a supplier that can provide me with a power valve for a holley carb for my 53 Mercury. The carb # is eac9510 the part #9594a. I have looked at the usual suppliers and no luck. Thanks is advance. W

 

[tubman]

Have you tried Daytona Parts or (shudder) Vintage Speed?

 

[flatjack9]

Check with Charley, NY.

 

[meric42]

Charlie at Vintage Speed has the correct power valves already machined to fit correctly and thus seal properly also.

 

[scicala]

Charlie at Vintage Speed has the correct power valves already machined to fit correctly and thus seal properly also.

The power valve in a '53 Merc carb (model 1901) is not the same as the Holley power valve that is in Holley 94's and later 4 and two barrel Holley carbs.
It's the same style as the ones used in Holley 2140 and 4000 teapot carbs. A fine threaded small brass valve with a light spring in it (similar to Stromberg 97 power valves, but different thread).


I believe they are reproduced, but can't remember where.


Sal

 

[RalphG]

Mikes Carburetors had a repair kit for my Teapot Holley on the 52 Merc but it did not come with a power valve. Not sure if they could get one but worth a look.
https://www.carburetor-parts.com/Holley-1901-Teapot-Carburetor-Kit_p_1098.html

 

[Charlie ny]

Ralph,
PM me, I have some.....I do need to know the number.
Charlie ny

 

[scicala]

1952 and 1953 Merc's take a #52 power valve (2 - .037" holes) according to my Holley manual.


Sal

 

[walter123]

Thanks guys for all your help, special thanks to Charley ny