scicala
Well-known member
- City
- Utica
- State
- Mich.
- Price
- $200
This is a Holley 660 CFM universal center squirter drag race carburetor made by Holley for drag racing on 2x4 tunnel rams. I found it at a local swap meet for a very low price. It was all original and never touched or modified. Has original jets and calibration (blocked power system).
I completely went through the carb and made sure all is correct. Also has great original greenish coloring. All new gaskets, pump diaphragm and o-rings. All ethanol tolerant.
Will work on a performance engine with one four barrel also. Recommended for drag racing since it is jetted slightly richer because of no power system.
The carb is part number LIST 4224-S, and date code 271 (1st week of July 1972). Holley started making this carb in the 70's for drag racing.
Asking $200 (fully guaranteed) plus shipping
Thank you, Sal Cicala (586) 612-1650 sal_cicala@yahoo.com
I completely went through the carb and made sure all is correct. Also has great original greenish coloring. All new gaskets, pump diaphragm and o-rings. All ethanol tolerant.
Will work on a performance engine with one four barrel also. Recommended for drag racing since it is jetted slightly richer because of no power system.
The carb is part number LIST 4224-S, and date code 271 (1st week of July 1972). Holley started making this carb in the 70's for drag racing.
Asking $200 (fully guaranteed) plus shipping
Thank you, Sal Cicala (586) 612-1650 sal_cicala@yahoo.com
