Hidden Turn Signal Bracket.

pgerhardt

pgerhardt

Well-known member
I had to make a bracket to mount a small turn signal switch (to replace the big ugly switch attached to my steering column with a hose clamp) behind the dash rail of my 29 tudor. I made a video of the process since it may help others with the same idea. Click here to see it.
 
Badpuppy said:
Wondering how you replace the compound TS switch with that SPDT?
Click to expand...

That's what I was wondering.

I do have SPDT switch mounted behind the dash rail but it is a simple stand alone system without all the bells and whistles that your type of system has. It is mounted to one of the tank bolts.

31868671925_3ea2ea2c5e.jpg


38565914885_936fd86bc8.jpg
 
Last edited:
Badpuppy said:
Wondering how you replace the compound TS switch with that SPDT?
Click to expand...

It is part of an all electronic turn signal system which doesn't need a heat activated flasher, is self canceling, supports indicator lights if you want, and allows you to used cowl or fog lights as turn signal lights by just flashing the side toward which you are turning if they are on when to signal a turn.

to see their web site click here
 
Oh, I see. You're not just replacing the turn signal switch shown in your video with the SPDT switch, your replacing the whole system.

The way your video starts off I was under the impression that you were just replacing the switch.
 
Y-Blockhead said:
Oh, I see. You're not just replacing the turn signal switch shown in your video with the SPDT switch, your replacing the whole system.

The way your video starts off I was under the impression that you were just replacing the switch.
Click to expand...

Sorry, I guess I could have been more clear about the nature of the whole project.
 
You must log in or register to reply here.
Back
Top