Help with wiring harness
- Thread starter Job
- Start date
Tom Wesenberg
Well-known member
I would just buy the correct harness.
Yes, you can fix the harness, but you'd have to splice onto the cowl light wire and run a wire to each headlight, so you'd have an extra wire hanging loose. Then you'd have to have the bullet ends soldered on and the correct socket for 3 wires.
Yes, you can fix the harness, but you'd have to splice onto the cowl light wire and run a wire to each headlight, so you'd have an extra wire hanging loose. Then you'd have to have the bullet ends soldered on and the correct socket for 3 wires.
Mike V. Florida
Well-known member
Technically it is very simple;
Splice two wires to the end of the wire that goes to the cowls lights and run one to each headlight small bulb socket.
Splice two wires to the end of the wire that goes to the cowls lights and run one to each headlight small bulb socket.
roccaas
Well-known member
Or buy a pair of Cat Eye or other driving lights and run them off of the cowl circuit. That's what I did.
Cowl illuminate only for turn signals, and the Cat Eye's are my Daytime Running Lights and occasionally my "get home at night" lights when the halogens have a problem.
Cowl illuminate only for turn signals, and the Cat Eye's are my Daytime Running Lights and occasionally my "get home at night" lights when the halogens have a problem.