reggiedog
Well-known member
- City
- Durand
- State
- Wisc
HI: o.k. I need some help on a few things. I have 31 model a Tudor Sedan Delux. But my problem is patch panels I put on a few patches like the panel after the doors. And I have the full panels for the doors that are not put on yet. And I was going to glue them on instead of welding them on. And I have to buy or just piece the cowl in But that's not the problem the thing is the patch pannels that you buy from the suppliers are wrong the bead that is the bead is to small. I want to know what to do I weld the new patches and I've done the inner fenders there right but the others aren't right to match the original bead. I've been told to soder them it to match but I don't know how to soder. But I do know how to weld and I've been told to get rid of the bondo and the primer I have primer on one quarter pannel. And a few other places on the car. And then put two part sealer on before I put primer on or bondo. So is this true do I take all the primer and bondo back off and seal the car and I'm going to just paint the car in my garager. I'm going to sand or bead blast the car inside and out on a few places out side so what do I do. I need to get the car done for my daughters wedding next summer. And I have alot of welding to do and all of the fabric and the dam painting. I'm goin to have alot of work but I don't know what to do on this little problem. So I need some advice from some one that has done it before. Thanks let me know on what to do thanks reggiedog.
