Harmon Collins dual point Distributor

C

cobbie

Member
I need some help, I purchased a bunch flathead parts, and found a Harmon Collins dual point Distributor with dual Mallory Condensers, The Distributor is in very good condition, points both look very good. Missing the name plate and of course the expensive rotor and cap. I have no use for this as I am running an 8BA. I have no Idea of the approx value ?? I plan on selling if there is much value to lower the cost of the rest of the parts, any help would be appreciated.

Cobbie
 
Last edited:
Not just a dual point but actually a dual coil distributor. I am not up to speed on current valuation but the "dual coil" is worth considerably more than a "dual point.
 
Just an FYI...the HC rotors are being reproduced, and the outer cap that's currently being offered by Bob Drake for use on the Ford crab distributor will also work on HC, but some firing order numbers would need to be corrected when used on HC.
I have recently seen these complete HC distributors selling in the range of $400.00 to $500.00.
 
JWL
thanks for your reply but you say dual coil, I only see one place for the coil to plug in, I know that I don't have the cap but am I missing something.
 
those two round cylinder things which are upside down are coils. there a complete one on ebay just now for $299 buy it now.
 
BUBBAS IGNITION said:
One coil goes to center cap and the other coil goes to the outter cap .......
Click to expand...

Maybe this pic helps? DD

HCdp.jpg
 
Thanks,
That makes since now, I was not doubting JWL . I did know the 2 brass pieces were condensers. Thanks Bubba's and V8COOPMAN.

Cobbie
 
yes,
it won't fit an 8BA I would like to trade it for one that does. Any one know where I can buy a name tag for Harmon Collins.

Cobbie
 
You must log in or register to reply here.
Back
Top