Harmon Collins distributor for V8

[JOSEPHCgr]

Can anyone help me out with a source for points & rotor for this unit .?
Thank you all for your help Joe

 

[Pothole Jim]

The butterscotch colored plastic parts and the cap are nearly impossible to find, if found they will be costly. I have seen points that fit the unit they come in a box from "Sierra Supply Company"

Jere Jobe at Vintage Carburetion Technologies rebuilds and restores these units. He used Bendix aircraft points in it. And he recommends running Standard UC-15's condensers for 12V. They have the resistor built in.

 

[JM 35 Sedan]

Can anyone help me out with a source for points & rotor for this unit .?
Thank you all for your help Joe

Joe, here's an older FB post on this subject http://www.fordbarn.com/forum/showthread.php?t=7162&highlight=harmon+Collins&showall=1

A fellow Fordbarner helped me find some Bendix aircraft points and some condensers for my HC distributor. These parts were exactly like the original parts. I don't know of a source for replacement plastic parts but Jere Jobe sounds like a possibility based on another post here. If you do find a good source for the plastic parts, please post your info on the source. Thanks!

Some reference pics

 

[kwmpa]

plastic parts are virtually non existant...if you do find them they are in other units and no one wants to seperate them..i went through this with the two i had....then upgraded to an HC mag