harman collins mag restoration

K

kwmpa

Senior Member
im finishing up a big cube flathead build and want to restore my Harman collins magneto....anybody know of anyone good with fast turn around
 
Tom Cirello did an awesome job on my H-C mag on my midget. Cirello Magnetos, 948 Highline Dr. , Payson, AZ 85541 (541) 948-0547
 
kwmpa said:
304 stroker motor...harrell heads, eddelbrock 4x2 intake...for of the new stromberg 97s, harman collins mag, schnieder racing cam .395 lift 270 duration
Click to expand...
Kwmpa, those 304's have got some b--s. How are you running the carb linkage on the 4-2's, direct or progressive? What's this engine going in? I'm building a 276 with a 400jr cam, Offy 400 heads, and Esky 3-2 intake with 94's with direct linkage. This is for a Vintage stock car. Thanks Walt
 
Walt Dupont--Me. said:
Kwmpa, those 304's have got some b--s. How are you running the carb linkage on the 4-2's, direct or progressive? What's this engine going in? I'm building a 276 with a 400jr cam, Offy 400 heads, and Esky 3-2 intake with 94's with direct linkage. This is for a Vintage stock car. Thanks Walt
Click to expand...

Gonna run it direct going in a 36 3-window with a 39 trans and a cyclone quickchange
 
kwmpa said:
304 stroker motor...harrell heads, eddelbrock 4x2 intake...for of the new stromberg 97s, harman collins mag, schnieder racing cam .395 lift 270 duration
Click to expand...

You should be able to spit out some axle keys with that thing! :D
 
You must log in or register to reply here.
Back
Top