Had a flat today

The stem popped off. With some help from a bystander, we were back on the road with the spare in minutes. I guess I can buy a 4.75/5.00 X 19 tube from Coker Tire.

What's the proper psi inflation for these tires? Mine are whitewalls.

Thanks, Billy
 
The stem popped off. With some help from a bystander, we were back on the road with the spare in minutes. I guess I can buy a 4.75/5.00 X 19 tube from Coker Tire.

What's the proper psi inflation for these tires? Mine are whitewalls.

Thanks, Billy

Same as the blackwalls, 30 PSI.
 
When I run 35 psi, the ride is hard but the car doesn't wander all over the place. When I run 30 psi, the ride is softer but the car is "squishy" on the road.
With good, well lubricated springs, I prefer 35 psi.
 
Do a little research. On of the suppliers (probably Bratton's) started producing high quality tubes. Of course they were more expensive. They have probably become common throughout the industry but I don't know.

Charlie Stephens
 
Do a little research. On of the suppliers (probably Bratton's) started producing high quality tubes. Of course they were more expensive. They have probably become common throughout the industry but I don't know.

Charlie Stephens

IMO, if a tube is say, $20 and it is unusable rubbish, it is expensive. You paid $20 and got nothing. A tube at $40 might seem expensive but it will likely last years. For your $40, you get years of service, making it a far cheaper option than $20 for nothing. By the time the $40 tube is thrown away, the price will have been forgotten.
About 10 years ago, someone thought it was a good idea to use recycled material to make tubes. It wasn't. It was then when everybody was having trouble that (I think you're right) Brattons had some made with virgin materials. They were much better. The only tubes we can buy here now are Chinese yet seem to be OK so far.
 
Back
Top