Grab handle

[Y-Blockhead]

The one issue keeping me from fabing one is I don't want to drill mounting holes in my dash rail.

Isn't the one pictured just picking up existing mounting screws?

The upper one appears to be half way between the dash rail mounting screws. My dash rail does not have a screw where the lower one is located.

 

[CarlG]

I should have checked mine before speaking. Mine is just like what you described.

 

[Y-Blockhead]

I should have checked mine before speaking. Mine is just like what you described.

I certainly wish you were right!! It would give me less heartburn if I didn't have to drill holes. But I do need something to help the CEO to get in.

 

[Bryan Thompson]

I made one with a piece of hardwood and some 3/4 inch metal bar.
The metal can be bent in a "U" shape or two "L" shapes and can be drilled to pickup existing holes in the dash.
Bryan

 

[Y-Blockhead]

I made one with a piece of hardwood and some 3/4 inch metal bar.
The metal can be bent in a "U" shape or two "L" shapes and can be drilled to pickup existing holes in the dash.
Bryan

Another good option...