Good Body man in IL.

crumbaa

crumbaa

Member
After reading through the repro fenders posts I think I have decided that my original 1930 68B front fenders (both with spare wells in them), through a bit rough, should be saved. I am no body man and would like to know of any one knows a good Model A body man in Illinios, Iowa, Indiana, or Missouri. I prefer Illinios but am willing to drive to get a high quality outcome.
 
don't let the posts scare you as they are not that bad to do.. were lucky to have them available and if your old fenders are rough or going to take a ton of hours to make them right i wouldn't hesitate in using the repos
 

Attachments

  • image.jpg
    image.jpg
    60.6 KB · Views: 62
Check with your local club. There is usually someone who can do the work for you.

If not, ship them to Flop and ask him to massage them back into shape.

All Model A fenders can be saved.
 
I thought there was a post a few weeks ago that said they weren't
going to make the 30-31 front fenders any more because the dies are to worn.

Bob
 
crumbaa,,,, there is a pretty active Model A Club not too far from you in Peoria and in Washington, Il.

Although I don't know any of them personally, I would try that route they will know somebody that can help you.

Model A Ford Club of America
Central Illinois A's
108 North Pine
Washington, Ill.

----- KC Lee
-----309-251-7488
 
crumbaa said:
After reading through the repro fenders posts I think I have decided that my original 1930 68B front fenders (both with spare wells in them), through a bit rough, should be saved. I am no body man and would like to know of any one knows a good Model A body man in Illinios, Iowa, Indiana, or Missouri. I prefer Illinios but am willing to drive to get a high quality outcome.
Click to expand...

Only one place I would put my name on.

Les Anderson, in Kanawha, Iowa

Anderson Restoration

515-762-3528

He has always built point cars.

Also a nice Guy.

Herm.
 
I just bought 2 31 frt fenders from Gas Light auto parts they make the fenders , they were very good the fit was almost perfect . the only place they needed any adjustment was where they meet the splash apron at the top 1/2 an inch by 3 inch area that needed reshaped. around $435 each without wells plus shipping . the rear cp fenders are even better
 
You must log in or register to reply here.
Back
Top