Garage Find

Tom Wesenberg said:
A clutch disc with springs can chatter just as well as a plain one.
For chatter, I'd look at flywheel housing alignment, oil on the disc, clutch pressure plate problems, and loose or worn parts along the driveline.
Click to expand...

Hi Tom, I do not have a "Chatter" problem was just making a talking point
 
Tom Wesenberg said:
A clutch disc with springs can chatter just as well as a plain one.
For chatter, I'd look at flywheel housing alignment, oil on the disc, clutch pressure plate problems, and loose or worn parts along the driveline.
Click to expand...

Hi Tom, was just curious
 
Last edited:
Today my Friend and I pulled the valves, cam & lifters then replaced the timing gears, lifters with the double nut adjustable, brought the seats back to the correct angle and then lapped in all the valves, tomorrow we will install and adjust the valves. Here are some pictures
 

Attachments

  • IMG_0225.jpg
    IMG_0225.jpg
    53.9 KB · Views: 55
  • IMG_0227 (2).jpg
    IMG_0227 (2).jpg
    55.7 KB · Views: 54
  • IMG_0228.jpg
    IMG_0228.jpg
    70.6 KB · Views: 54
Aloha chuck
really sounds and runs well..you probably found an old one that was maintained instead of being run into the ground like most of these were before the war was over. Hope you find a buyer..i'm sure you will.
Don
 
THAIGUY said:
Aloha chuck
really sounds and runs well..you probably found an old one that was maintained instead of being run into the ground like most of these were before the war was over. Hope you find a buyer..i'm sure you will.
Don
Click to expand...

Hi Don, Not really trying to sell engine, but I now have two complete running engines and if someone really needs one and makes a fair offer I will let one go, I am what you would call a "Horder" but willing to help out a fellow Model A'er ;)
 
You must log in or register to reply here.
Back
Top